DN Solutions FM 200 5AX

$250,000 - $400,000 Updated 2026-03-13

Key Specifications

X Travel

200 mm (7.9 in)

Y Travel

340 mm (13.4 in)

Z Travel

300 mm (11.8 in)

Max Spindle

42,000 RPM

Spindle Taper

HSK-E40

Tool Capacity

Overview

The DN Solutions FM 200 5AX is a compact, high-speed simultaneous 5-axis machining center purpose-built for small precision parts. With a 200 mm (7.9 in) diameter rotary table and a 42,000 RPM HSK-E40 spindle, the FM 200 5AX is optimized for micro-machining, medical implants, dental prosthetics, watch components, and small aerospace parts where surface finish and detail resolution matter more than material removal rate.

Axis travel is deliberately compact at 200 x 340 x 300 mm (7.9 x 13.4 x 11.8 in) on X/Y/Z. The A-axis tilts from -30 to +120 degrees while the C-axis rotates 360 degrees continuously, providing full 5-axis simultaneous contouring capability. The small work envelope and high spindle speed make this machine a specialist — it excels at what it's designed for but isn't suited for general-purpose machining.

The 42,000 RPM spindle delivers 10 kW (13 hp) and 6.5 Nm (5 ft-lb) of torque through an HSK-E40 taper. This is a high-speed, low-torque configuration ideal for small-diameter tools (typically 0.1-12 mm) cutting aluminum, titanium alloys, cobalt chrome, PEEK, and other materials common in medical and dental applications. The HSK-E40 taper provides the concentricity and runout control needed at these spindle speeds and small tool diameters.

The 24-tool magazine is adequate for most small-part 5-axis jobs where tool count is modest. At 7,000 kg (15,432 lb), the FM 200 5AX is relatively light for a 5-axis machine, and its compact footprint of 2,225 x 1,972 x 2,375 mm (88 x 78 x 94 in) makes it easy to fit into medical device clean rooms or tight shop layouts. The FANUC 31iB5 control provides standard 5-axis kinematic functions with high-speed look-ahead processing suited to the fine surface finish work this machine targets. The FM 200 5AX competes with the GF Machining Mikron MILL S 200 U, Kern Micro HD, and Röders RXP 200 in the compact high-speed 5-axis segment.

Full Specifications

Parameter	Value
X-Axis Travel	200 mm (7.9 in)
Y-Axis Travel	340 mm (13.4 in)
Z-Axis Travel	300 mm (11.8 in)
A Axis Range	-30° to +120°
C Axis Range	360° (continuous)
Max Spindle Speed	42,000 RPM
Spindle Taper	HSK-E40
Spindle Torque	6.5 Nm (5 ft-lb)
Spindle Motor Power	10 kW (13 hp)
Tool Capacity	24
Table Diameter	200 mm (7.9 in)
Machine Dimensions	2,225 x 1,972 x 2,375 mm (88 x 78 x 94 in)
Machine Weight	7,000 kg (15,432 lb)
CNC Control	FANUC 31iB5
Max Spindle Speed	42000r/min
X Axis Travel Distance	200mm
Y Axis Travel Distance	340mm
Metric	IMPERIAL

Specifications sourced from dn-solutions.com — verified 2026-03-28

Strengths & Limitations

Strengths

42,000 RPM spindle with HSK-E40 taper delivers exceptional surface finish quality on small precision parts with fine-diameter tools
Compact 2,225 x 1,972 mm footprint fits into clean rooms, dental labs, and tight production cells
Purpose-built for micro to small-part 5-axis work — the small work envelope maximizes rigidity-to-travel ratio for superior accuracy
HSK-E40 taper provides the concentricity and balance needed for ultra-high-speed machining with minimal runout
7,000 kg machine weight keeps foundation requirements modest while providing adequate mass for vibration damping at these cutting forces

Limitations

200 x 340 x 300 mm travel is extremely compact — parts larger than roughly 150 mm diameter require a different machine
6.5 Nm spindle torque severely limits material removal rates in steel and titanium — this is a finishing and precision machine, not a rougher
24-tool magazine is small and limits job complexity for multi-operation parts requiring many tool changes
HSK-E40 taper limits maximum tool diameter and restricts the machine to small-diameter cutters

Best For

Medical device manufacturers producing orthopedic implants, spinal components, and surgical instruments in cobalt chrome and titanium Dental prosthetic manufacturers machining crowns, bridges, and abutments in zirconia, PEEK, and titanium Watch and jewelry manufacturers producing precision components requiring exceptional surface finish Aerospace manufacturers machining small turbine blades, vanes, and precision fittings in superalloys

Frequently Asked Questions

01 What does a DN Solutions FM 200 5AX cost?

A new FM 200 5AX typically falls between $250,000 and $400,000 depending on options. The high-speed 42,000 RPM spindle and HSK-E40 tooling system command a premium. A linear motor variant (FM 200 5AX Linear) with faster axis dynamics is available at the higher end of the range. Despite the small work envelope, the precision spindle technology and 5-axis kinematics place this machine in a similar price band to much larger conventional 5-axis VMCs.

02 What materials can the FM 200 5AX cut?

The FM 200 5AX excels with aluminum, brass, titanium alloys (Ti-6Al-4V), cobalt chrome (CoCr), PEEK, zirconia, and other materials common in medical and dental applications. The 42,000 RPM spindle is optimized for small-diameter tools (0.1-12 mm) at high surface speeds. For heavy roughing in steel or titanium, the 6.5 Nm torque is a limitation — this machine is designed for precision finishing and light-to-moderate cutting, not bulk material removal.

03 How does the FM 200 5AX compare to the DNM 5AX 500?

These are fundamentally different machines for different applications. The DNM 5AX 500 has a 500 mm table, 12,000 RPM spindle, and BBT 40 taper — it's a general-purpose 5-axis VMC for medium-sized parts. The FM 200 5AX has a 200 mm table, 42,000 RPM spindle, and HSK-E40 taper — it's a specialist high-speed micro-machining platform for small precision parts. Choose the DNM 5AX for general 5-axis work; choose the FM 200 for small parts requiring exceptional surface finish and detail resolution.

04 Is the FM 200 5AX suitable for dental milling?

Yes, the FM 200 5AX is well-suited for dental prosthetic manufacturing. The 200 mm table accommodates dental disc blanks, the 42,000 RPM spindle provides the surface speeds needed for zirconia and PEEK, and the 5-axis kinematics allow single-setup machining of complex crown and bridge geometries. The compact footprint fits dental lab environments. However, dedicated dental CAM software (like Exocad or 3Shape) is needed alongside the FANUC control for dental-specific workflows.